CAT MARINE ENGINE | 3412 ENGINE ASSEMBLY | 550 kW
CAT 3412 Marine Engine Assembly 550 kW V12
A complete, run-tested CAT Marine Engine power unit for vessels that cannot afford downtime. Every 3412 Engine Assembly we ship uses a fresh valve seat insert, matched pistons and liners, calibrated injection and a full gasket set — delivered as a drop-in replacement backed by a deep inventory of marine engine parts.
550 kW Rated Output |
1800 rpm Rated Speed |
V12 Cylinders |
27.0 L Displacement |
New Condition |
Why Buyers Choose This 3412 Assembly
Valve seat insert done right New valve seat insert in all 24 intake and exhaust positions, pressed to the specified interference fit, cut to the correct face angle and lapped to each valve. |
Compression you can measure Bores honed, rings matched and heads vacuum leak tested so the engine reaches rated compression on the first start, not after a second strip down. |
Parts available after the sale Every internal marine engine part in this build can be reordered separately, which keeps your 3412 service planning simple for years. |
Technical Specification
| Engine Model | CAT 3412 |
| Part Name | Engine Assembly |
| Engine Type | Marine Diesel Engine, 4-Stroke |
| Cylinder Arrangement | V-12 |
| Displacement | 27.0 L |
| Bore x Stroke | 137 mm x 152 mm |
| Power Rating | 550 kW (738 hp) at 1800 rpm |
| Aspiration | Turbocharged and Aftercooled |
| Cooling System | Heat Exchanger, Water Cooled |
| Valve Train | Overhead valve with replaceable valve seat insert |
| Condition | New Replacement |
| Application | Marine Propulsion, Auxiliary Power, Boat, Excavator |
Valve Seat Insert: The Part That Decides Compression
After an overhaul, most 3412 power loss comes from the top end rather than the bottom end. A worn or recessed valve seat insert lets combustion pressure escape past the valve, so the engine starts hard, smokes under load and burns more fuel. Every cylinder head in this assembly is therefore fitted with a new valve seat insert, machined to the CAT face angle, pressed to the correct interference and lapped against a refaced valve. The result is a sealing surface that holds pressure at full 550 kW load.
Head work does not stop at the seat. Guides are checked for clearance, valve stems are measured, springs are load tested and the injector bore is re-cut so the nozzle seals cleanly inside the head. Each head is then vacuum leak tested and the valve lash is set before the covers go back on.
Repair workshops and fleet operators who prefer to do their own top-end work can order the valve seat insert, valve, guide and head gasket as individual marine engine parts. That option is often the most economical route for a mid-life 3412 refresh, and it avoids replacing an otherwise serviceable cylinder head.
CAT 3412 Part Numbers We Supply
Each component below is listed in both written forms used on original documentation, with and without the hyphen, so your team can cross-check against an existing parts manual without translating anything.
| Component | CAT Part No. | Notes |
| Cylinder Head Assembly | 133-2991 / 1332991 | Machined and tested |
| Valve Seat Insert (Intake / Exhaust) | 4N-5891 / 4N5891, 4N-5892 / 4N5892 | Pressed and lapped |
| Piston and Liner Kit | 9Y-4008 / 9Y4008, 1W-6530 / 1W6530 | Matched set |
| Piston Ring Set | 9Y-6086 / 9Y6086 | Chrome faced |
| Fuel Injector | 7E-6042 / 7E6042 | Calibrated and tested |
| Turbocharger | 0R-5852 / 0R5852 | Balanced rotor |
| Water Pump | 203-1840 / 2031840 | Sealed bearing |
| Oil Pump | 4N-0735 / 4N0735 | Pressure tested |
| Crankshaft | 2W-8083 / 2W8083 | Ground to specification |
| Camshaft | 4N-8217 / 4N8217 | Hardened journals |
| Overhaul Gasket Kit | 7E-0285 / 7E0285 | Complete seal set |
| Seal and O-Ring Kit | 461-5422 / 4615422 | OEM specification |
Reference CAT part numbers assist identification and cross-checking only. Please confirm the exact number against your engine arrangement and serial number before ordering.
How Every Unit Is Built and Checked
| 01 | Core selection and cleaning — block and head cores are stripped, Magnaflux checked and cleaned before any machining starts. |
| 02 | Machining — bores are honed, decks are surfaced, crankshaft journals are ground and each cylinder head gets a new valve seat insert. |
| 03 | Assembly — pistons, liners, bearings and heads are fitted with measured clearances and torque values recorded for each unit. |
| 04 | Run test — the finished 550 kW assembly is checked for compression, oil pressure, cooling circulation and fuel delivery. |
| 05 | Packing — anti-rust treatment, sealed openings, reinforced wooden case and photo documentation before dispatch. |
Applications and Matching Marine Engine Parts
The CAT 3412 marine engine assembly serves tugboats, fishing vessels, workboats, crew boats, cargo and passenger vessels, dredgers, barges and marine generator sets. Because the 3412 platform is also widely used in earthmoving equipment, this assembly is frequently ordered as an excavator engine replacement, with the same diesel engine parts stock supporting both applications. Tell us the vessel or machine model and we will assemble the complete unit plus any spares you want loaded in the same case.
Global B2B Supply
Guangzhou Pinxin Engine Co., Ltd. ships CAT Marine Engine assemblies and diesel engine parts to importers, distributors, repair workshops, shipyards and fleet operators worldwide. Regular destinations include Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya, where buyers combine 3412 engine assembly units with marine engine parts in consolidated shipments and scheduled overhaul programmes.
Why Buy From Guangzhou Pinxin Engine Co., Ltd.
- One-stop sourcing for the 3412 engine assembly, valve seat insert and every matching marine engine part.
- Fitment confirmed by CAT part number and engine serial number before the order is released.
- Stable monthly capacity for fleet overhaul programmes and distributor stock planning.
- Export-grade packing designed for long distance transport and humid sea conditions.
- Fast B2B quotation turnaround, including sample orders and mixed parts combinations.
Request a CAT 3412 Engine Assembly Quote
Send your vessel type, engine arrangement number or the marine engine parts list you need, and our engineers will reply with availability, confirmed CAT part numbers and a detailed B2B offer. Contact Guangzhou Pinxin Engine Co., Ltd. today to keep your 3412 fleet running.



