| Place of Origin: | Guangdong, China |
|---|---|
| Brand Name: | CAT |
| Certification: | ISO 9001:2015 |
| Model Number: | 3406C |
| Minimum Order Quantity: | 1 Set |
| Price: | Negotiable |
| Packaging Details: | Assembly wrapped in VCI film and strapped to a fumigated export pallet, cushioned with shock absorbing foam blocks inside a plywood case |
| Delivery Time: | 15-25 working days after deposit |
| Payment Terms: | T/T,L/C,Western Union |
| Supply Ability: | 30 Sets per Month |
| Engine Model: | CAT 3406C | Cylinder Configuration: | Inline 6-Cylinder 4-Stroke Diesel |
|---|---|---|---|
| Displacement: | 14.6 L (893 Cu In) | Bore X Stroke: | 137 Mm X 165 Mm |
| Rated Output: | 300-400 KW At 1800-2100 Rpm | Aspiration: | Turbocharged And Aftercooled |
| Valve Seat Insert Size: | 45 Mm OD, Intake And Exhaust, All 6 Cylinders | Part Number Coverage: | 6I-3825 / 6I3825, 0R-3847 / 0R3847, 6I-3853 / 6I3853, 1W-7397 / 1W7397 |
| Highlight: | CAT 3406C Marine Engine Assembly,6-Cylinder Valve Seat Insert 3406C,3406C Complete Marine Engine Rebuild |
||
A dressed 3406C CAT Marine Engine assembly: six cylinder block, crankshaft, serviced cylinder head with new valve seat insert, piston and liner set, injection group, turbocharger and marine cooling package, matched and tested as one unit before shipment.
The 3406C is the late generation of a platform that still powers an enormous share of the world working fleet. Owners do not replace these engines, they rebuild them — which means the demand is steady and the specification has to be exact. This six cylinder CAT Marine Engine assembly is put together for that job: a complete, dressed unit that a yard can land on the bed, connect and commission, instead of a parts list that keeps the vessel out of service for weeks.
Each assembly is built around a crack tested 3406C block with bores restored to the 137 mm specification. The crankshaft is straightened, ground and polished, connecting rods are reconditioned with new bearings, and the cylinder head is fully rebuilt with a fresh valve seat insert on the intake and exhaust side, new guides, springs and seals, then pressure tested. The result is a 6-Cylinder unit that holds compression, holds oil pressure and holds its rated output under continuous marine load.
|
Block and Rotating Group
Crack tested 3406C block, ground crankshaft, reconditioned rods, matched piston and liner set, new main and rod bearings, rear seal and flywheel housing.
|
Cylinder Head Group
Rebuilt head with new valve seat insert intake and exhaust, lapped valves, new guides, springs, rotators and seals, pressure tested before assembly.
|
|
Fuel and Air Group
Unit injection pumps and injectors set to specification, turbocharger, aftercooler core, intake and exhaust manifolds for the rated 3406C output.
|
Marine Cooling and Lube
Sea water pump, heat exchanger, oil pump, oil cooler, filter base and piping configured for continuous loaded marine duty.
|
A 6-Cylinder marine diesel works at part load for most of its life, and that is the condition that punishes valve seat insert faces hardest. Once a seat insert starts to pit, that cylinder leaks compression, the turbo loses drive pressure, exhaust temperature climbs on the remaining cylinders and fuel burn rises without anybody noticing until the engine is opened up. On our 3406C assemblies every valve seat insert is pressed to the correct interference, checked for concentricity against the guide and lapped to the valve face, so all six cylinders seal evenly from the first hour of running. Stand-alone valve seat insert sets are also stocked for fleets that recondition heads locally.
| 3406C Head Component | Reference Number | Supply |
|---|---|---|
| Intake valve seat insert | 1W-7397 and 1W7397 | Fitted to assembly or supplied loose |
| Exhaust valve seat insert | 1W-7398 and 1W7398 | Fitted to assembly or supplied loose |
| Cylinder head assembly | 6I-3853 and 6I3853 | Complete, pressure tested |
| Top end gasket set | 6I-0764 and 6I0764 | Included with every assembly |
| Engine model | CAT 3406C marine configuration |
| Cylinder arrangement | 6-Cylinder inline, four stroke diesel |
| Displacement | 14.6 L (893 cu in) |
| Bore and stroke | 137 mm x 165 mm |
| Rated output | 300 to 400 kW at 1800 to 2100 rpm, depending on rating |
| Aspiration | Turbocharged and aftercooled |
| Fuel system | Mechanical unit injection, calibrated on test bench |
| Cooling | Heat exchanger or keel cooled marine group |
| Valve seat insert | 45 mm outer diameter, all six cylinders, intake and exhaust |
| Rotation | Counter clockwise, marine gearbox ready |
Numbers are accepted in either style, so a workshop sheet written as 6I-3825 and an office file written as 6I3825 both point at the same assembly. The complete 3406C propulsion build is usually quoted against arrangement 6I-3825 or 6I3825, with short block 0R-3847 or 0R3847 when only the core group is required. Inside the unit you will find cylinder head 6I-3853 and 6I3853, crankshaft 1W-8846 and 1W8846, piston 9Y-4008 and 9Y4008, cylinder liner 197-9322 and 1979322, valve seat insert intake 1W-7397 and 1W7397, valve seat insert exhaust 1W-7398 and 1W7398, fuel injection pump 6I-3100 and 6I3100, oil pump 2W-5602 and 2W5602, sea water pump 2W-1224 and 2W1224, and turbocharger 7C-8638 and 7C8638. Photograph the engine plate or the number stamped on the block and we will confirm the exact CAT Marine Engine assembly before quoting.
|
Continuous Propulsion
Trawlers, tugs, pilot and crew boats, and inland river cargo vessels that run the 3406C loaded for long stretches.
|
Auxiliary and Standby
Marine genset duty on workboats, barges and harbour craft, where a 6-Cylinder CAT Marine Engine has to pick up load on demand.
|
Our regular destinations include Australian and Canadian fishing and towage operators, Chilean and Peruvian aquaculture and mining ports, Zambian, Congolese, Nigerian, Ghanaian, Tanzanian, Zimbabwean and South African river and lake fleets, Indonesian, Thai, Malaysian and Vietnamese workboat owners, plus dealers and shipyards in Brazil, Saudi Arabia, Mozambique, Argentina and Kenya. Consolidated loading with other marine engine parts, spare valve seat insert sets and additional gasket groups on the same order are routine.
Tell us the vessel type, the rating you need and whether the unit is for propulsion or auxiliary service. We will confirm the correct 3406C CAT Marine Engine assembly configuration, valve seat insert specification and part numbers in the format your team prefers.
![]()
![]()
![]()
![]()
![]()