| Place of Origin: | China |
|---|---|
| Brand Name: | CAT |
| Certification: | ISO 9001:2015 |
| Model Number: | 3516B |
| Minimum Order Quantity: | 1 Unit |
| Price: | Negotiable |
| Packaging Details: | Preservative oil applied, VCI film sealed, steel frame base, seaworthy crate |
| Delivery Time: | 30-45 working days after order confirmation |
| Payment Terms: | T/T,L/C at sight |
| Supply Ability: | 8 Units per Month |
| Engine Model: | 3516B | Product Type: | Complete Marine Diesel Engine Assembly |
|---|---|---|---|
| Cylinder Configuration: | 16 Cylinder V Form | Bore And Stroke: | 170 Mm X 190 Mm |
| Displacement: | 69.1 L | Aspiration: | Turbocharged, Aftercooled |
| Head And Valve Train: | Heads Fitted, Valve Seat Insert Pressed And Lapped | Delivery Condition: | Assembled Unit, Preservative Oil Applied, Crated On Steel Frame |
| Highlight: | 3516B Marine Diesel Assembly,Complete V16 Power Unit,Valve Seat Insert Sealing |
||
One assembled CAT Marine Engine 69.1 litre V16 power unit, built to the arrangement number of the engine it replaces, with the sixteen cylinder heads fitted and the valve seat insert pressed, lapped and contact checked before shipment.
| MODEL | 3516B | DISPLACEMENT | 69.1 L |
| LAYOUT | 16 Cylinder V Form | BORE x STROKE | 170 x 190 mm |
| ASPIRATION | Turbocharged, aftercooled | SHIPMENT | Assembled, crated |
The buyer receives one complete engine, assembled and timed in our workshop. Nothing on the unit is left for the yard to build: the cylinder block is line bored, the crankshaft is ground and balanced, sixteen pistons and liners are fitted, every cylinder head is torqued down with its valve seat insert already pressed and lapped, and the valve train is set to the correct timing on both banks.
The CAT Marine Engine unit is matched to the arrangement number stamped on your existing engine plate. That number fixes the rating, the rotation, the cooling layout and the position of the accessory drive, so the replacement drops onto the same mounts and connects to the same flanges as the engine being lifted out.
On a V16 the top end job doubles in scale compared with a V12: twice the heads, twice the valve seat insert sets, twice the chance of a mismatch between banks. Supplying the whole unit removes that risk in one order and keeps the docking plan on schedule.
| 01 | Valve seat insert pressed into each head, seat contact checked by blueing, valve recession measured and logged bank by bank. |
| 02 | Crankshaft main and rod clearances recorded cylinder by cylinder across both banks, with the record supplied alongside the engine. |
| 03 | Camshaft timing and valve lash set to the arrangement drawing, head bolts torqued in sequence on the left and right bank. |
| 04 | Preservative oil applied to machined faces, unit locked to a steel frame, VCI sealed, crated for sea transport. |
A CAT Marine Engine assembly leaves the workshop only after all four checkpoints are signed off on the unit record.
| Assembly | Reference | State at shipment |
|---|---|---|
| Engine arrangement, complete | 249-7028 / 2497028 | Built to arrangement number |
| Cylinder block | 4P-5221 / 4P5221 | Line bored, deck checked |
| Crankshaft | 2W-7729 / 2W7729 | Ground, balanced, installed |
| Camshaft group | 7C-4560 / 7C4560 | Timed to arrangement drawing |
| Connecting rod assembly | 8N-1725 / 8N1725 | Big end checked, installed |
| Piston assembly | 229-5856 / 2295856 | Ring set fitted, installed |
| Piston ring set | 197-9350 / 1979350 | Gap checked per cylinder |
| Cylinder liner | 211-7826 / 2117826 | Plateau honed, installed |
| Cylinder head, loaded | 249-1310 / 2491310 | Torqued, valve train set |
| Valve seat insert, inlet | 6I-0751 / 6I0751 | Pressed and lapped in head |
| Valve seat insert, exhaust | 107-2065 / 1072065 | Pressed and lapped in head |
| Intake valve | 9N-4050 / 9N4050 | Face ground, lash set |
| Exhaust valve | 9N-4051 / 9N4051 | Face ground, lash set |
| Valve guide | 5S-6720 / 5S6720 | Clearance measured |
| Head gasket group | 214-5580 / 2145580 | Per cylinder bank |
| Oil pump assembly | 4W-8360 / 4W8360 | Fitted, primed |
| Water pump assembly | 6I-1490 / 6I1490 | Fitted, seal checked |
| Turbocharger assembly | 147-1730 / 1471730 | Fitted, end play checked |
| Fuel injector | 7E-8720 / 7E8720 | Tested before fitting |
Every reference is written in both of the two forms it appears in on parts lists, so the same item can be matched whichever form your catalogue uses. Where a number has been superseded, we confirm the current state before the build starts, for example camshaft group 7C-4561 / 7C4561 or head gasket set 214-5581 / 2145581.
These complete units are ordered for tugs, ferries, fishing vessels, inland push boats and offshore support craft running the 3516B rating, and for the same engine used as prime power on site where the block has reached the end of its economic life.
Our CAT Marine Engine assemblies ship to Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya. Importers in these markets often hold one unit as a fleet spare and rotate it between vessels, which keeps a docking schedule intact when an engine fails without warning.
Send the points above and we return configuration confirmation, lifting data and a quotation for your market in one reply.
![]()
![]()
![]()
![]()
![]()
![]()
![]()