products

CAT 3408 Marine Engine Assembly 3408B 3408C Complete Diesel Motor for Fishing Boat

Basic Information
Place of Origin: Guangdong, China
Brand Name: CAT
Certification: ISO 9001:2015
Model Number: 3408
Minimum Order Quantity: 1 Unit
Price: Negotiable
Packaging Details: Complete unit wrapped in VCI film and strapped to a fumigated export skid, cushioned with foam blocks inside a seaworthy plywood case
Delivery Time: 25-35 working days after deposit
Payment Terms: T/T,L/C,Western Union
Supply Ability: 12 Units per Month
Get Best Price
Chat Now
Detail Information
Part Name: Engine Assembly Engine Model: CAT 3408 (3408B / 3408C)
Engine Type: Marine Diesel Engine Displacement: 18.0 L
Cylinder Arrangement: V8 Bore X Stroke: 137 Mm X 152 Mm
Aspiration: Turbocharged, Aftercooled Rated Output: 373 KW At 1800 Rpm
Highlight:

CAT 3408 Marine Engine Assembly

,

3408B 3408C Diesel Motor

,

Fishing Boat Engine Repower


Product Description

MAINTENANCE DOSSIER  /  3408-ME-11

CAT 3408 Marine Engine Assembly
3408B and 3408C coverage, 18.0 L V8, one closed unit

One 3408 Engine Assembly is dispatched per order, already timed, dressed and pressure checked, for vessels whose owners want the CAT Marine Engine back in the hull inside one yard period instead of two.

This CAT 3408 assembly is offered as a complete Marine Engine unit and as the parts group around it, so a yard can take the whole 3408 Engine Assembly or only the section that failed. Buyers working on 3408B and 3408C hulls use the same enquiry route: send the arrangement number or the reference already written on the parts list, and the reply comes back as one matched scope for the CAT Marine Engine in question. Nothing in the unit is left for the receiving workshop to set up beyond the fuel connection and the sea trial.

Model coverage 3408 / 3408B / 3408C Displacement 18.0 L, V8
Bore x stroke 137 mm x 152 mm Rating 373 kW at 1800 rpm
Aspiration Turbocharged, aftercooled Supply 1 unit per shipment

Three ways buyers enter this 3408 programme

The same CAT Marine Engine platform is quoted in three scope, depending on how far the damage reaches.

Complete unit
7W2157
Block, crank, eight piston and liner sets, both heads, injectors, turbo and pumps all arrive assembled. Chosen when the old block or crank is past saving, or when the vessel cannot afford a second yard period.
Short block
4W-4466
Base structure and rotating group only. Used where the existing head groups and injectors are still serviceable and the yard prefers to rebuild the top end from its own stock.
Top-end set
7N-0859
Loaded heads, head gasket 7N0930, injectors 7E6044 and the gasket set 3P7632. The route for a 3408 that still holds oil pressure but has begun to breathe past the seats.

Beyond those three, the surrounding Marine Engine Parts are quoted line by line: liner kit 1W6541, piston and ring set 9Y-4000, main and rod bearings 4W5494, crankshaft 7N-0802, camshaft 7N0016, turbocharger 6N8009, water pump 2W-8000, oil pump 2W7398 and fuel transfer pump 1P7466. Keeping the whole scope on one sheet is what makes a 3408 Engine Assembly order predictable for an importer holding several vessels.

How the unit is built, stage by stage

Each stage closes with a measurement, and the measurement is written against the reference that owns it.

STAGE 01   BASE

The block is stripped, cleaned and line bored, then the deck is checked for flatness before anything is torqued onto it. Where the original casting is cracked, the 4W4466 short block replaces it and the rest of the scope stays unchanged.

STAGE 02   ROTATING GROUP

Crankshaft 7N0802 is ground to the next undersize, balanced and fitted with 4W-5494 bearings matched to the finished journals. End float and each rod clearance are recorded individually, then the assembly is rotated by hand before the pistons go in.

STAGE 03   POWER END

Liner kit 1W-6541 is pressed and honed in the block, then piston and ring set 9Y4000 goes in with the ring gaps staggered by hand. Protrusion is measured on all eight holes. Loaded heads 7N0859 are then torqued down over 7N-0930 gaskets in three passes.

STAGE 04   DRESSING

Camshaft 7N-0016 is timed to the arrangement drawing, injectors 7E-6044 calibrated as a set, and lash set cold. Turbocharger 6N8009, water pump 2W8000, oil pump 2W7398 and fuel transfer pump 1P-7466 are fitted and the unit is run before it is wrapped.

What the receiving yard is asked before shipment

Four answers fix the build. Where any of them is uncertain, the unit is held rather than guessed at.

Plate number The arrangement on the engine being replaced sets rating, rotation and the position of the accessory drive. A model code alone cannot fix those three, which is why the plate is asked for first.
Gearbox flange Flywheel housing and coupling pattern decide whether the 3408 Engine Assembly drops onto the existing reduction gear, or whether an adaptor is needed with the order.
Cooling layout Keel cooled or heat exchanger, and where the pipe stubs sit. Getting this wrong turns a two-day installation into a fortnight of fabrication in the engine room.
Service history Hours, last top-end, and whether the block has been bored before. A block already at maximum oversize is quoted as a 4W-4466 short block rather than as a rebuild.

Where these CAT Marine Engine units are working

Fishing fleets, tug and workboat operators, dredging contractors, marine workshops and engine trading companies in Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya run this 3408 Engine Assembly and the surrounding Marine Engine Parts on repeat schedules. What changes between those markets is only the mix: complete units for repower work in Australia, Canada and Chile; liner, bearing and gasket packages for workshops in Indonesia, Thailand, Malaysia and Vietnam; and consolidated containers of CAT Marine Engine parts for traders in Nigeria, Ghana, Tanzania, Kenya and Saudi Arabia.

In Zambia, Congo, Zimbabwe and Mozambique the complete unit is normally ordered together with a spare head 7N-0859 and a set of injectors 7E6044, because a second shutdown ashore costs more than the spares held on the shelf. Fleet buyers in Brazil, Peru and Argentina plan the 3408 Engine Assembly around a survey date instead, so the arrangement is confirmed first and the build slotted into the docking window. For Canada and South Africa, the reference set on the packing sheet has to match the unit exactly, and it does, line for line.

Send the plate number, receive a matched 3408 quotation

Tell us the arrangement on the engine being replaced and the references already on your parts list. The reply will come back as a single scope covering the complete 3408 Engine Assembly, with any extra Marine Engine Parts priced on the same sheet. Enquiries from distributors, workshops and fleet maintenance teams are answered by the technical desk rather than an auto-reply.

Ask for the release sheet of the unit currently in stock if the recorded figures are needed before a purchase order is raised for your CAT Marine Engine project.


CAT 3408 Marine Engine Assembly 3408B 3408C Complete Diesel Motor for Fishing Boat

CAT 3408 Marine Engine Assembly 3408B 3408C Complete Diesel Motor for Fishing Boat

CAT 3408 Marine Engine Assembly 3408B 3408C Complete Diesel Motor for Fishing Boat

CAT 3408 Marine Engine Assembly 3408B 3408C Complete Diesel Motor for Fishing Boat

CAT 3408 Marine Engine Assembly 3408B 3408C Complete Diesel Motor for Fishing Boat

CAT 3408 Marine Engine Assembly 3408B 3408C Complete Diesel Motor for Fishing Boat

Contact Details
John

Phone Number : 17846849442

WhatsApp : +8617846849442