Name: National Standard IV 571-0939 5710939 Injector CAT C4.4 Engine Fuel Injection Component
Brand: Guangzhou Pinxin Engine Co., Ltd.
SKU: C4.4
Price: 465.00 USD
Availability: InStock

Detail Information

Part No:	571-0939 5710939	Brand:	CAT
Model:	C4.4	Condition:	New
Quality:	High Quality	MOQ:	A Piece
Main Product:	Electrical Parts, Engine Parts, Hydraulic Parts, Wearing Parts	Payment Terms:	Wire Transfer, Paypal, AliPay, Western Union, Bank Transfer
Mode Of Transport:	DHL Express Express UPS
Highlight:	CAT C4.4 Engine 5710939 Injector , 571-0939 Fuel Injection Component , CAT C4.4 Engine Fuel Injection Component

Product Description

For National Standard IV 571-0939 5710939 Injector CAT C4.4 Engine Parts

Specification

Part No	571-0939 5710939
brand	CAT
Engine model	C4.4
Condition	New
Quality	High Quality
Minimum order quantity	A piece
Main product	Electrical parts, engine parts, hydraulic parts, wearing parts,
Payment terms	Wire transfer, paypal, AliPay, Western Union, Bank transfer
Mode of transport	DHL Express Express UPS

Description

The 571-0939 Injector is a core fuel injection component developed specifically for CAT C4.4 engines that meet the National Stage IV Motor Vehicle Pollutant Emission Standard. It undertakes the key responsibility of precisely controlling fuel injection quantity, injection timing, and atomization effect. Adopting high-pressure common rail injection technology, this injector integrates a high-precision electromagnetic control valve core and a multi-hole injector nozzle inside, which can uniformly atomize fuel into micron-level particles, ensuring full mixing of fuel and air in the combustion chamber to achieve efficient combustion. Strictly adhering to CAT's original design specifications and National Stage IV environmental protection technical requirements, the product not only adapts to the fuel system control logic of the C4.4 engine through material upgrading and structural optimization, but also effectively reduces nitrogen oxide and particulate matter emissions while improving fuel economy. Whether it is used for maintenance and replacement of C4.4 National Stage IV engines in construction machinery, commercial vehicles or fixed power equipment, it can ensure that the engine meets environmental emission requirements and maintains a stable operating state.

Advantage

National Stage IV Compatibility, Worry-free Emission Compliance:Optimized fuel injection strategy for National Stage IV emission requirements, injection pressure increased to 1800bar. Combined with the 6-hole precision injector nozzle design, the fuel atomization particle size is controlled between 10-20μm, and the combustion efficiency is increased by more than 12%. Nitrogen oxide emissions are reduced by 40% and particulate matter emissions by 60% compared with non-National Stage IV compatible injectors. It fully meets the GB17691-2018 National Stage IV emission standard, helping equipment pass environmental testing smoothly.
Excellent Injection Precision, Outstanding Fuel Economy:Equipped with an imported high-precision electromagnetic valve core with a response time of only 0.001s, which can adjust the injection quantity in real time according to different engine working conditions (idle speed, acceleration, high load), with an error controlled within ±1%. On the premise of ensuring power output, the engine's fuel consumption per 100 kilometers is reduced by 5%-8%, which can significantly reduce operating costs in long-term use.
Wear-resistant and Corrosion-resistant Material, Adaptable to Harsh Working Conditions:The injector nozzle is made of tungsten-cobalt alloy, reinforced by plasma spraying, with a surface hardness of over HRC65, and the fuel scouring and wear resistance is improved by 50%. The valve body is made of corrosion-resistant stainless steel, which can adapt to low-quality fuel with high sulfur content, effectively resist corrosion and blockage caused by fuel impurities, and extend the service life to more than 3000 hours.
Original Factory Protocol Compatibility, Convenient Installation and Debugging:Fully matches the ECU (Electronic Control Unit) communication protocol of CAT C4.4 engine, and can be directly installed and used without modifying the control program. Equipped with a dedicated diagnostic interface, it can quickly complete injection timing calibration and fault detection through CAT's original diagnostic equipment, greatly simplifying the maintenance and debugging process and reducing the technical threshold for maintenance.

Performance

Parameter Category	Specific Indicators
Applicable Engine Model	CAT C4.4 (National Stage IV Standard)
Product Model	571-0939 / 5710939
Injection Method	High-pressure Common Rail
Maximum Injection Pressure	1800bar
Number of Injector Nozzle Holes	6 Holes
Fuel Atomization Particle Size	10-20μm
Solenoid Valve Core Response Time	≤0.001s
Injection Quantity Error	±1%
Working Voltage	12V/24V (Adapts to Engine Electrical System)
Working Temperature Range	-40℃ - 120℃
Injector Nozzle Material	Tungsten-Cobalt Alloy (Plasma Spraying Reinforcement)
Valve Body Material	Corrosion-Resistant Stainless Steel
Recommended Fuel Grade	Diesel (Complies with GB 19147-2016 Standard)
Designed Service Life	≥3000 Hours
Connection Method	Threaded Connection (Matches Original Factory Interface)
Adaptable Emission Standard	National Stage IV Motor Vehicle Pollutant Emission Standard

FAQ

Q1: When will my goods be shipped?
A: Your goods will be dispatched within 24 hours after payment confirmation.

Q2: What is the lead time?
A: We maintain sufficient stock for immediate fulfillment.

Q3: What shipping methods do you offer?
A: We ship via sea, air, or express (DHL, FedEx, TNT, UPS, EMS).

Q4: What is the delivery time?
A: Stock items take 2 to 5 days; pre-order items take 7 to 15 days. Contact us for specifics.

Q5: How can I track my shipment?
A: We will provide you with the tracking number as soon as your order is shipped.

Packing&Shipping

National Standard IV 571-0939 5710939 Injector CAT C4.4 Engine Fuel Injection Component 0

Tag:

Place of Origin:	China
Brand Name:	CAT
Model Number:	C4.4

Minimum Order Quantity:	1pcs
Price:	USA$ 250-680
Packaging Details:	Original/Neutral/Customized
Delivery Time:	1-15 work days
Payment Terms:	T/T,Western Union
Supply Ability:	100pcs,1-15 work days

National Standard IV 571-0939 5710939 Injector CAT C4.4 Engine Fuel Injection Component

CAT C4.4 Engine 5710939 Injector

571-0939 Fuel Injection Component

CAT C4.4 Engine Fuel Injection Component

Diesel Engine Fuel Injector,

Excavator Engine Fuel Injector,

Excavator Fuel Injector

456-3493 4563493 Engine Fuel Injector 336E C9.3 Excavator Parts For CAT 9.3

320-0680 3200680 Engine Fuel Injector CAT Perkins C6.6 C7.1 Excavator Spare Parts

0445120463 QSB6.7 Diesel Common Rail Injector For Sany Heavy Industry 0 445 120 463

High Precision 485-9752 4859752 CAT Euro IV Engine DEF Injection Kit C15 C18 INJECTOR

8N7005 Fuel Injector Nozzle CAT 3406 3408 3412 3306 4W7020 Construction Machinery Spare Parts

For 370-7282 370-7280 Common Rail Injector CAT 329F E330GC C4.4 C7.1 Engine

U2645F025 Engine Fuel Injector Perkins 1106 C4.4 C6.6 Excavator Replacement Parts

High Compatibility 418-8820 4188820 Engine Fuel Injector CAT 3608 3612 3616 Engine Parts