| Place of Origin: | Guangdong, China |
|---|---|
| Brand Name: | CAT |
| Certification: | ISO 9001:2015 |
| Model Number: | C-9 |
| Minimum Order Quantity: | 1 Unit |
| Price: | Negotiable |
| Packaging Details: | Complete unit wrapped in VCI film, bolted to a fumigated export skid and closed inside a seaworthy plywood case with foam blocking |
| Delivery Time: | 20-30 working days after deposit |
| Payment Terms: | T/T,L/C,Western Union |
| Supply Ability: | 15 Units per Month |
| Part Name: | Engine Assembly | Engine Model: | CAT C-9 |
|---|---|---|---|
| Engine Type: | Diesel Engine | Displacement: | 8.8 L |
| Cylinder Arrangement: | Inline 6 | Bore X Stroke: | 112 Mm X 149 Mm |
| Aspiration: | Turbocharged, Aftercooled | Rated Output: | 200 KW At 1900 Rpm |
| Highlight: | CAT C-9 Excavator Engine Assembly,C-9 Complete Diesel Motor,330C 336D Engine Replacement |
||
A 330C or 336D that has lost its engine is usually losing hire income by the day, so this CAT C-9 Engine Assembly is built as a closed unit: block, crank, six piston and liner sets, head, injectors, turbo and pumps all fitted and timed before it leaves the bench. Buyers take it either as a complete Excavator Engine Assembly for a straight swap, or as the parts group around it when only the top end has failed. Both routes are quoted from the same Excavator Engine Parts list, so the scope and the references stay consistent from the first enquiry to the packing sheet.
| Model | CAT C-9 | Displacement | 8.8 L, inline 6 |
| Bore x stroke | 112 mm x 149 mm | Rated output | 200 kW at 1900 rpm |
| Aspiration | Turbocharged, aftercooled | Fitment | 330C / 336D / 336D2 |
Where a machine is still earning, the usual request is not a whole engine but a defined slice of one. Where the block has been bored to its limit, the answer is a complete 3911075 assembly rather than another oversize set. Where the crank and rods are sound but the top end is burning oil, the answer is a head, injectors and a gasket set. Reading the work order correctly at the start is what keeps a CAT C-9 Excavator Engine Assembly from being ordered one size too large.
Each scope below is quoted with the references the customer already holds on file.
| Complete unit 391-1075 |
Arrangement-level build: block, crankshaft, six piston and liner sets, loaded head, injectors, turbocharger, water pump and oil pump, timed on the stand. This is the CAT Excavator Engine Assembly for machines being swapped rather than repaired. |
| Long block 324-7380 |
Block, crank, rods, split pistons 385-1657 and rings, with the head face clean and ready for the customer's own top end. Common in markets where the existing head has just been reconditioned. |
| Top-end set 163-2478 |
Head group with valve seals 1632478, lifters 575-4995 and injectors 236-0962, plus gasket 2097293 and whatever seals the joint needs. The cheapest route when the bottom end still holds oil pressure. |
Surrounding CAT Excavator Engine Parts are priced on the same sheet: connecting rod bearings 213-3190, piston rings 1613425, 168-7209 and 1979299 for the three groove positions, water pump 4W-0253 (also catalogued as 1077701), priming pump 1375541, belt 1922169 and the impeller kit 3754052 carried as a spare by most workshops.
Four stages, each closed with a measurement logged against the reference that owns it.
01 STRIP AND CHECK
The core is stripped, the block is checked for cracks and deck flatness, and the bores are measured to see whether an oversize set is still possible. If not, the order moves to 391-1075 instead of another liner job, and the customer is told before any machining starts.
02 ROTATING GROUP
Crankshaft is ground and balanced, rod bearings 2133190 are matched to the finished journals, and end float is set. Each rod is weighed and each clearance written down, because a C-9 that is going back into a 336D will spend its life at high load and low speed.
03 POWER END
Liner sets are pressed and honed, split pistons 3247380 fitted with rings 161-3425, 1687209 and 197-9299 staggered by hand, then protrusion is measured on all six holes. The head goes down over a 209-7293 gasket and is torqued in three passes.
04 DRESSING AND TIMING
Injectors 2360962 are calibrated as a set, valve lifters 575-4995 set cold, camshaft timed to the arrangement, then turbocharger, water pump 4W0253, oil pump and priming pump 137-5541 are fitted. The unit is run, re-checked and only then wrapped for the crate.
A C-9 fits several excavator platforms, and the differences are in the dressing rather than in the long block.
| Platform | 330C and 336D carry the same 8.8 L six, but engine mounts, fan drive and exhaust routing differ. Send the machine prefix and the unit is dressed to match rather than to the model name alone. |
| Electronics | Later machines will not accept an early harness. Where the controller is being replaced at the same time, 4787932 or 307-7542 is quoted with the engine, together with harness 2011283 for the 330C. |
| Cooling and drive | Fan position, pulley size and belt length 192-2169 are confirmed before assembly, because a belt that is one groove short turns a two-day fit into a week of waiting for a courier. |
| Machine hours | Hours on the hour meter, last injector change and whether the block has been bored tell us which scope to quote. A machine past 12,000 hours on its original bottom end is normally quoted complete. |
Workshops rebuilding a CAT C-9 usually want the service items on the same order, so they are quoted alongside the Excavator Engine Assembly rather than afterwards: oil filters 1R0751, 1R-1808, 2492347 and 4238524, fuel water separator 3261643, air filter 243-6350, and the seal groups 2223909 and 2457339 that cover the joints most often disturbed during a swap. Gasket 2097293 and seal 3465193 sit on the same list, which means the receiving workshop opens one crate instead of three.
For a fleet running several C-9 machines, the same list is used as a standing kit: one complete assembly held for the next failure, plus a top-end set and a filter pack on the shelf. Because every line comes from one CAT Excavator Engine Parts catalogue, the references on the packing sheet match the references in the maintenance file without translation.
Excavator owners, plant hire firms, earthworks contractors, independent workshops and machinery traders in Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya buy this C-9 Excavator Engine Assembly and the surrounding Excavator Engine Parts on repeat schedules. The pattern differs only in the mix: complete units for hire fleets in Australia, Canada and Chile; long blocks and top-end sets for workshops in Indonesia, Thailand, Malaysia and Vietnam; and consolidated containers of CAT excavator parts for traders in Nigeria, Ghana, Tanzania, Kenya and Saudi Arabia.
In Zambia, Congo, Zimbabwe and Mozambique the assembly is normally ordered with a spare injector set 236-0962 and a gasket 2097293 held on site, because a second stoppage on a remote site costs more than the spares. Buyers in Brazil, Peru and Argentina plan the rebuild around a contract start date instead, so the arrangement is fixed first and the build slotted into the calendar. For Canada and South Africa the packing references must match the maintenance file exactly, and they do, line for line.
A working reference set drawn from the CAT parts catalogue for the components inside a complete C-9 build, laid out so buyers can price a full unit against a partial rebuild and workshops can check what is already on the shelf before ordering a dressed Engine Assembly.
These are catalogue references for the C-9 build family, listed so your team can line them against the parts list already in hand. The arrangement on the engine plate remains the final word on which of them apply to a given machine, and anything not shown here is quoted from the same catalogue on request.
Tell us the machine model, the engine arrangement on the plate and any references already on your parts list. The reply comes back as one scope for the complete CAT C-9 Engine Assembly, with extra Excavator Engine Parts priced on the same sheet. Enquiries from distributors, workshops and fleet maintenance teams are answered by the technical desk rather than an auto-reply.
Ask for the release sheet of the unit currently on the bench if the recorded figures are needed before a purchase order is raised for your excavator engine project.
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()