| Place of Origin: | Guangdong, China |
|---|---|
| Brand Name: | CAT |
| Certification: | ISO 9001:2015 |
| Model Number: | 3126B |
| Minimum Order Quantity: | 1 Unit |
| Price: | Negotiable |
| Packaging Details: | VCI film wrap, fumigated export skid, seaworthy plywood case with foam blocking |
| Delivery Time: | 5-10 working days for stock units |
| Payment Terms: | T/T,L/C,Western Union,Trade Assurance |
| Supply Ability: | 40 Units per Month |
| Part Name: | Engine Assembly | Engine Model: | CAT 3126B |
|---|---|---|---|
| Cylinder Arrangement: | Inline 6, Four Stroke | Displacement: | 7.2 L |
| Bore X Stroke: | 110 Mm X 127 Mm | Aspiration: | Turbocharged |
| Fuel System: | HEUI, Hydraulic Electronic Unit Injection | Rated Output: | 130 - 205 KW (175 - 275 Hp) |
| Condition: | New Build, Dyno Tested | ||
| Highlight: | 3126B Complete Engine Assembly,322C 325C Excavator Diesel Motor,HEUI Dyno Tested Drop In Unit |
||
Built up as one unit, timed, dressed and run on the dyno, then crated as a single Excavator Engine Assembly that takes the place of the engine coming out of the frame.
The CAT 3126B is the 7.2 litre six cylinder turbo diesel that sat in the 322C and 325C class machines for years, and it is still one of the most rebuilt engines in the field. This listing is for the whole thing: a new cylinder block with a crankshaft checked to standard, six matched piston and liner sets, a loaded and pressure tested head, a calibrated set of HEUI injectors, and the turbocharger, oil pump, water pump, HEUI pump, manifolds, filter head and engine harness already bolted on. It reaches the buyer as one Engine Assembly, not as a long block with a box of extra parts beside it.
Most people who price an Excavator Engine Assembly are in one of two positions. A 325C is sitting in a pit with a scuffed crank, a cracked head or an injector that has washed a bore, and every extra day of downtime costs more than the engine itself. Or a workshop in a mining corridor wants a known good CAT Engine on the shelf so the next failure does not stop a contract. Both are quoted from the same build sheet, and both can be split into individual Excavator Engine Parts if only one section of the engine has failed.
The 3126B is the later development of the 3126, with the HEUI injection system and the revised head and piston design. That matters when a unit is being ordered, because a 3116 or an early 3126 will bolt into the same hole and still run wrong. Every build in this listing is confirmed against the arrangement number on the engine plate before assembly, and the plate is photographed and sent to the buyer so the unit can be checked before it leaves.
| DECISION POINT | COMPLETE ENGINE ASSEMBLY | IN FRAME REBUILD |
|---|---|---|
| Machine downtime | Hours on site instead of weeks waiting on a machine shop | Machine waits for machining, parts and bench time |
| Result certainty | The finished unit runs on the dyno before it is crated | Quality rests on the shop doing the work |
| Access in the frame | Lift out, set the dressed unit, prime, start | Head, sump and turbo work done inside a cramped bay |
| Parts exposure | One reference, one shipment, one arrival date | Several suppliers and several arrival dates |
| Better fit for | Production machines, rental fleets and contract sites | Owners with bench capacity and time to spare |
A 3126B is identified on the plate by its arrangement number, and the component numbers only resolve underneath that arrangement. The same 7.2 litre engine left the factory in a long list of arrangements across machine models, ratings and emission steps, so a component number that is right for one plate is wrong for the next. We do not publish one blanket number for this build and we do not ask buyers to match the listing against a catalogue page. We ask for the plate.
Send the arrangement number and serial number from the engine plate, and the component list for that arrangement comes back written out in both of the styles used on parts paperwork, so it lines up with whichever catalogue your team works from, with the separator and without it. Block, head, crankshaft, rods, pistons, liners, turbocharger, injector set, pumps, gasket set and harness are all quoted line by line, usually inside one working day.
If you already hold a component number and want it checked before committing, send it with the serial number. We confirm whether it belongs to your arrangement, and if it does not, we give you the right reference for that plate rather than substituting something that fits the hole but not the calibration.
This build is specified for the CAT 322C and 325C hydraulic excavators, machines where the engine sits behind a narrow frame opening and the rear of the block is awkward to reach, which is exactly the case where a dressed CAT Engine beats working inside the frame. Both badges covered more than one production configuration over their run, so coverage is confirmed per serial number rather than taken from the decal. Other machines that run the same 3126B configuration are quoted from the same reference sheet, and the 3126 and 3116 are never treated as interchangeable without the plate being checked.
Units from this Engine Assembly line ship regularly to Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya. Most of those shipments are distributor and workshop orders that put an engine together with hydraulic and undercarriage Excavator Engine Parts in the same case, because a container is expensive and a second shipment costs more than the parts it carries.
For b2b buyers the usual pattern is one unit for a machine that has failed, then a standing arrangement: two or three engines a year, with a spare injector set and a gasket kit held on the shelf beside them. Fleet operators in Chile, Zambia and Indonesia often take a mixed pallet, one complete CAT 3126B engine plus overhaul kits for the rest of the fleet, and we build that pallet against their machine list so nothing arrives that does not fit.
Packing is VCI wrap on the machined faces, the unit bolted to a fumigated export skid and closed in a seaworthy plywood case with foam blocking. Documents cover the packing list, commercial invoice and the certificate of origin needed at destination, and the crate is marked for the machine it is going into so the receiving workshop does not have to open it to find out.
This set sits beside the plate check rather than replacing it. The arrangement still decides the build; what follows is the catalogue side of the same conversation, so a buyer can see which references belong to the 3126B family, price a complete unit against a partial overhaul, and tell us what is already on the shelf before a dressed Engine Assembly is ordered.
![]()
![]()
![]()
![]()
![]()
![]()