products

CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

Basic Information
Place of Origin: Guangdong, China
Brand Name: CAT
Certification: ISO 9001:2015
Model Number: C7.1
Minimum Order Quantity: 1 Unit
Price: Negotiable
Packaging Details: VCI protection on machined faces, fumigated export skid, seaworthy plywood case with foam blocking
Delivery Time: 5-12 working days for stock units
Payment Terms: T/T,L/C,Western Union,Trade Assurance
Supply Ability: 60 Units per Month
Get Best Price
Chat Now
Detail Information
Part Name: Engine Assembly Engine Model: CAT C7.1
Displacement: 7.01 L Bore X Stroke: 105 Mm X 127 Mm
Engine Configuration: Inline 6 Cylinder Turbocharged Diesel Fuel System: Electronically Controlled Unit Injection
Rated Output: 129 - 202 KW (172 - 271 Hp) Peak Torque: Up To 1,240 N.m
Condition: New Build, Dyno Tested Emission: Stage II / Stage IIIA Compatible
Highlight:

C7.1 Complete Engine Assembly

,

Scheduled Shutdown Engine Swap

,

Plate Verified Diesel Power Unit


Product Description

DRAWING REF · C7.1 ENGINE ASSEMBLY

CAT C7.1 Engine Assembly for 326 / 330GC / 336GC Excavators

A complete 7.01 litre inline six Excavator Engine Assembly, built and timed as one unit against the arrangement on your plate, then dyno run and crated for a planned swap window.

UNIT DATA
Model  C7.1
Displacement  7.01 L
Layout  Inline 6
Bore x stroke  105 x 127 mm
Aspiration  Turbocharged
Min order  1 unit
BUILD TYPE
Complete dressed assembly
TESTING
Run in and dyno pull
FITMENT BASIS
Plate and arrangement
SCOPE SPLIT
Full unit or long block

01  /  BUILD DEFINITION

This CAT Engine is assembled as a single build, not as a pile of components waiting for a fitter to work out what goes where. A new cylinder block carries a crankshaft ground to standard, six matched piston and liner sets, a loaded and pressure tested head, and a calibrated injector set, with the turbocharger, oil pump, water pump, thermostat housing, manifolds, filter head and engine harness already mounted. The result is a CAT C7.1 power unit that can be lifted into the frame, primed and started inside a planned shutdown window.

Most buyers come to this Excavator Engine Assembly with a machine that still runs but no longer earns: blow by rising, oil pressure drifting, a coolant smell after load, injector corrections stacking up on one cylinder. Continuing to run it means unplanned failure in a pit at the worst moment. The alternative is a scheduled swap, and that is what this listing is built around. Where only the top end has failed, the same sheet quotes the Excavator Engine Parts needed for a head and turbo job instead, so the decision stays in the buyer's hands.

Nothing here is sold on a guess about the model badge. The 7.01 litre platform ran through several arrangement releases with different injection calibration, manifold patterns and harness plugs, so the plate decides the build, and the plate is read before the crate is closed.

02  /  SPECIFICATION SHEET

Part name Engine Assembly, complete dressed unit
Engine model CAT C7.1
Displacement 7.01 L
Bore x stroke 105 mm x 127 mm
Configuration Inline 6 cylinder, four stroke, turbocharged
Fuel system Electronically controlled unit injection, matched set
Output range 129 - 202 kW (172 - 271 hp) by rating
Peak torque Up to 1,240 N.m at 1,400 rpm
Cooling Water cooled, integral oil cooler
Condition New build, run in and dyno tested before packing

03  /  SHUTDOWN WINDOW PLAN

T-45 DAYS
Plate data confirmed, arrangement locked, build slot booked. Buyer receives the component list for the confirmed arrangement.
T-30 DAYS
Assembly and dyno run. Power, torque, boost, oil pressure and coolant temperature recorded, photos filed against the serial number.
T-7 DAYS
Crated and documented. Packing list, invoice and certificate of origin released ahead of the vessel or air booking.
DAY 0 - 2
Lift out, mount the dressed unit, prime the fuel system, start. Old unit goes onto the core pallet that travelled with the new one.

04  /  CRATE CONTENTS

Block and main caps  ·  crankshaft ground to standard  ·  connecting rods with bearings  ·  piston and liner sets  ·  loaded cylinder head  ·  calibrated injectors  ·  turbocharger  ·  oil pump  ·  water pump  ·  thermostat housing  ·  intake and exhaust manifolds  ·  filter head  ·  engine harness and sensors  ·  gasket set, seals and hardware  ·  dyno report and plate photographs

Every line above is ticked against the build sheet before the case is closed, and the ticked sheet travels in the crate. Core pallet and return labelling are supplied when the buyer wants the old unit collected on the same shipment.

05  /  HOW NUMBERS ARE HANDLED

A C7.1 is identified on the plate by its arrangement number, and component references only resolve underneath that arrangement. We do not print a single blanket part number across the model range, because a reference that is correct for one plate is wrong for the next, and a listing full of numbers that do not match the buyer's engine costs everyone a week. So the process runs the other way: you send the plate, we return the list.

That returned list covers block and short block, cylinder head assembly, crankshaft, connecting rods and bearings, piston and liner sets, turbocharger, injector set, oil pump, water pump, gasket set and harness, each written in both of the styles used on parts paperwork, with the separator and without it, so your team can line it up against whichever catalogue you work from. Turnaround on that list is normally one working day from the plate photo.

Service references we can state outright, because they do not change build to build: fuel filter 1R-0750, also typed 1R0750, and engine oil filter 1R-0739, also typed 1R0739. Both are genuine CAT service parts we stock, and both can travel inside the crate with the engine together with the water separator element matched to your filter head.

If you already hold a component number and want it checked before committing, send it with the machine serial number. We confirm whether it belongs to your arrangement, and where it does not, we say what the correct reference for that plate is instead of shipping a part that bolts up but does not calibrate correctly.

05B  /  COMPONENT REFERENCE SET

A working reference set drawn from the CAT parts catalogue for the components that make up a complete engine build: crankshaft and rotating group, pistons, rings and liners, cylinder head and valve train, then turbocharger, fuel and lubrication. Buyers use it to price a full unit against a partial rebuild, and workshops use it to check what is already on the shelf before ordering a dressed Engine Assembly.

CAT C7.1  ·  ENGINE BUILD FAMILY
Component Reference Set  34 REFERENCES
COMPONENT PART NO. ALT. NO. NOTE
CRANKSHAFT AND ROTATING GROUP11 refs
Crankshaft, engine361-88513618851Cast crankshaft, ground to standard
Crankshaft, engine361-88453618845Alternate journal configuration
Crankshaft, engine506-19825061982Current production reference
Crankshaft assembly337-08723370872Balanced assembly
Crankshaft gear, 49 teeth224-12142241214Timing gear, press fit
Connecting rod, 380 mm centres144-07251440725Matched set on request
Connecting rod, 392.5 mm centres381-65553816555Matched set on request
Connecting rod bearing, 144.45 mm OD107-73301077330Big end shell, standard
Connecting rod bearing, steel back230-25202302520Standard size
Crankshaft main bearing, standard286-58012865801Main shell, standard
Crankshaft main bearing653-86336538633Main shell, standard
PISTONS, RINGS AND LINERS3 refs
Piston ring, intermediate, 300 mm OD566-54905665490Compression ring
Piston ring, oil control, 300 mm OD566-54915665491Oil control ring
Cylinder liner bushing556-07015560701Liner and bushing set
CYLINDER HEAD AND VALVE TRAIN10 refs
Cylinder head gasket317-30643173064Multi layer steel
Valve cover gasket, cylinder head225-64512256451Rocker cover seal
Valve guide, 16 mm, grey iron122-73751227375Pressed into head
Rocker shaft313-40853134085Shaft and pedestal
Rocker shaft307-83223078322Shaft and pedestal
Camshaft, right hand421-00494210049Bank specific
Camshaft, left hand421-00714210071Bank specific
Engine camshaft223-74682237468Standard profile
Camshaft bearing249-63922496392Cam bore shell
Camshaft bearing, 98.11 mm OD116-13591161359Cam bore shell
TURBOCHARGER, FUEL AND LUBRICATION10 refs
Turbocharger actuator630-67726306772Wastegate control
Turbocharger oil supply line368-85573688557Braided feed line
Turbocharger pipe436-10834361083Charge air pipe
Hydraulic injector pump group476-87694768769Pump and injector group
Engine fuel manifold568-84335688433Rail and fittings
Fuel filter assembly399-14753991475Filter head and element
Fuel water separator460-03104600310Primary separation
Engine oil filter element610-99286109928Spin on element
Engine lubricating oil filter628-63066286306Full flow filter
Oil cooler085-51990855199Plate type cooler

The numbers above are catalogue references for the C7.1 build family, listed so your team can line them against the parts list already in hand. The arrangement on the engine plate remains the final word on which of them apply to a given machine, and anything not shown here is quoted from the same catalogue on request.

06  /  MACHINE COVERAGE

This listing is written for the next generation 20 to 36 tonne excavator range, where the C7.1 is the standard power unit across several models, and for loaders built on the same engine configuration.

MODEL NOTES
326 Confirmed per serial number and arrangement
330GC Multiple production configurations, plate check required
336GC Late builds may carry an alternate arrangement
950GC loader Quoted on request from the same reference sheet

07  /  FIELD CONDITIONS

Ore and overburden dust
Filtration configuration and sealed connectors for sites where airborne silica reaches the bores first.
Long shifts under load
Cooling and oil control set for sustained digging duty rather than intermittent work.
Fuel from the back of a truck
Injection calibration tolerant of high sulphur diesel and variable storage on remote contracts.
Altitude and heat together
Settings validated for high altitude sites in the Andes and hot ambient work in the Gulf.

08  /  TERRITORIES WE SHIP TO

This Engine Assembly moves regularly to Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya. The bulk of those orders are distributor and workshop enquiries that put an engine on the same booking as hydraulic, undercarriage or electrical parts, with filters and gasket sets added so the machine goes back out complete.

Packing is VCI protection on machined faces, the unit bolted to a fumigated export skid, closed inside a seaworthy plywood case with foam blocking, and stencilled for the destination. Documents cover packing list, commercial invoice and the certificate of origin required on arrival.

09  /  ENQUIRY QUESTIONS

What do you need to quote?
Machine model, engine serial number, arrangement number from the plate, and the destination port. A photo of the plate shortens the whole exchange.

Can the build be split?
Yes: long block, short block, loaded head, injector set, turbocharger and liner kits are all quoted from the same confirmed arrangement.

What if my machine is not on the list?
Send the plate. C7.1 equipment extends beyond the excavator range, and the arrangement tells us what fits.

Is a core return expected?
Optional and arranged per order, with pallet and labels supplied when the buyer wants collection with the same shipment.

Payment terms?
T/T, L/C, Western Union and trade assurance orders.

Start with the plate, not the badge
Send the arrangement number, serial number and port. You get the matched component list, a price and a packing plan inside one working day.
Send Your Inquiry

CAT and C7.1 are used as reference identifiers for fitment only. Parts are supplied by an independent aftermarket manufacturer.


CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

CAT C7.1 Engine Assembly 326 330GC 336GC Excavator Diesel Engine Complete Swap Unit

Contact Details
John

Phone Number : 17846849442

WhatsApp : +8617846849442