products

CAT C11 Engine Assembly 232-2445 Excavator Diesel Engine for 336D2 340D2L 966H 972H

Basic Information
Place of Origin: Guangdong, China
Brand Name: CAT
Certification: ISO 9001:2015
Model Number: C11
Minimum Order Quantity: 1 Unit
Price: Negotiable
Packaging Details: VCI film wrap, fumigated export skid, seaworthy plywood case with foam blocking
Delivery Time: 5-10 working days for stock units
Payment Terms: T/T,L/C,Western Union,Trade Assurance
Supply Ability: 40 Units per Month
Get Best Price
Chat Now
Detail Information
Part Name: Engine Assembly Engine Model: CAT C11
Displacement: 11.1 L Bore X Stroke: 130 Mm X 140 Mm
Cylinder Arrangement: Inline 6 Cylinder, 4 Stroke Aspiration: Turbocharged, Aftercooled
Fuel System: MEUI Electronic Unit Injection Rated Output: Up To 287 KW At 1800 Rpm
Condition: New Build, Run In On Dynamometer Emission: Stage II / Stage IIIA Compatible
Highlight:

C11 Complete Engine Assembly

,

Turbocharged Aftercooled Diesel Motor

,

Plate Matched Engine Replacement


Product Description

HEAVY DUTY POWER UNIT

CAT C11 Engine Assembly for 336D2 340D2L Class Excavators

A complete 11.1 litre inline six Excavator Engine Assembly, assembled, timed and dressed in one build, then crated as a single unit for machines that cannot afford a long bench stay.

C11 / 11.1 L Inline 6 Turbocharged Aftercooled 130 x 140 mm MOQ 1 Unit

What This Engine Is

This CAT Engine is the complete 11.1 L six cylinder diesel used in the heavy end of the mid size excavator range, supplied as a drop in Engine Assembly rather than a pile of sub components. The block is new, the crankshaft is ground and polished to standard, the head is loaded and pressure tested, the MEUI injectors are calibrated as a matched set, and the turbocharger, oil pump, water pump, manifolds and engine harness are already on the unit when it is crated.

Buyers arrive at this Excavator Engine Assembly from two directions. Some have a 30 to 40 tonne machine down on site with a scored crank or a cracked head and need the whole unit swapped inside a maintenance window. Others run a rebuild shop and want a known good baseline engine on the shelf, then pull the components they need from a proven build. Both routes are quoted from the same Excavator Engine Parts sheet, so the references confirmed at enquiry are the references that appear on the packing list.

Ordering is settled by the plate, not by the model name. C11 powered machines were built across several emission steps and market specific arrangements, and two engines that look identical from the outside can carry different injection calibration, different manifolds and a different arrangement number. Send the machine serial number, engine arrangement number and a clear photo of the nameplate, and the build is confirmed before the crate is closed.

Specifications

ENGINE MODEL
CAT C11
DISPLACEMENT
11.1 L
BORE X STROKE
130 mm x 140 mm
CONFIGURATION
Inline 6, 4 stroke
ASPIRATION
Turbocharged, aftercooled
FUEL SYSTEM
MEUI electronic unit injection
RATED OUTPUT
up to 287 kW at 1800 rpm
COOLING
Water cooled, oil cooler integrated
EMISSION BUILD
Stage II / Stage IIIA compatible
CONDITION
New build, run in on dyno

Fitment Window

The C11 arrangement is most often requested for the 336D2 and 340D2L excavator class, and the same long block is also used in large wheel loader applications where the loader and excavator share the engine family. Fitment is confirmed per machine rather than assumed from the model badge.

336D2 336D2 L 340D2 L 966H 972H

Older 336D/340D tickets that carry a C11 plate, and 30 to 40 tonne machines rebuilt with a replacement C11 arrangement, are handled the same way: plate first, then build.

References We Work From

Parts lists for this engine are written in two parallel styles, and keeping both in view is the fastest way to avoid a wrong build. The main entry here is arrangement 232-2445, and the same line is often typed as 2322445 in dealer systems that drop the separator. A frequently quoted alternate for later production is 274-7996, which appears on some paperwork as 2747996.

Below the arrangement level, the components most often requested on their own are the short block 2565490, the loaded cylinder head 245-3836, the crankshaft 2322465, connecting rods 232-2470, piston sets 2322477, liner kits 256-5452, turbocharger 2507700 and injectors 264-4851. Service items that travel with the engine in the same crate usually include fuel filters 1R-0750 and oil filters 1R0739, both of which we stock in genuine and OEM equivalent grades.

If the number in your hand is not on this list, that is normal rather than a problem: C11 has been released in many arrangements. Send the machine model, engine serial number and plate photo, and the matching CAT Engine build is confirmed in writing before invoicing so there is no argument later about manifolds, injection timing or harness plugs.

Three Ways Buyers Order It

SCOPE A
Complete Assembly
Crank, rods, piston and liner sets, loaded head, injectors, turbo, pumps and harness all fitted and timed. Crates closed, drops in, runs. The default choice for a machine that has to be back on the bench quickly.
SCOPE B
Block and Rotating Group
Short block, crank, rods and pistons with bearings fitted and clearances recorded. Chosen by workshops that keep their own head, turbo and injection equipment.
SCOPE C
Top End Refresh Kit
Head assembly, injectors, gasket set, turbo and manifolds as one kit for engines with good bottom ends but tired top ends. Useful for scheduled overhauls in the workshop.

Build and Check Points

STEP 1
Incoming inspection. Castings, forgings, bearings and injectors are measured and recorded against drawing tolerances before any part reaches the assembly bench.
STEP 2
Assembly record. Torque values, plastigauge clearances, piston protrusion and injection timing go on the build sheet that travels with the serial number.
STEP 3
Leak and pressure test. Head, oil pan, front cover and turbo feed lines are pressure tested, then the dressed engine is checked for external leaks on the stand.
STEP 4
Run in and dyno. Controlled break in followed by a load pull, with power, torque, boost, oil pressure and coolant temperature readings photographed for the buyer.

Field Conditions It Is Built For

Dust and laterite
Heavy duty air filtration configuration and sealed harness connectors for quarry and laterite duty where airborne grit kills cylinders first.
High ambient heat
Cooling package and injection calibration set for 45 to 50 C ambient work in Gulf and North African summer conditions.
Variable fuel quality
Unit injection calibration tolerant of high sulphur diesel common on remote mine sites, reducing injector and filter complaints.
Cold starts
Grid heater and glow configuration available for sites that see sub zero mornings, with cold start verified on the test stand.

Export Programme

This Engine Assembly ships regularly to Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya. Most of those orders are distributor and repair workshop enquiries that combine an engine with undercarriage, hydraulic or electrical parts in one consolidated shipment.

Each unit is wrapped in VCI film, bolted to a fumigated export skid and closed inside a seaworthy plywood case with foam blocking, with machined surfaces coated for the voyage. Documentation covers packing list, commercial invoice and the certificate of origin requested for the destination.

Component Reference Set

Catalogue numbers for the parts that make up a complete C11 build

A working reference set drawn from the CAT parts catalogue for the components inside a complete C11 build, laid out so buyers can price a full unit against a partial rebuild and workshops can check what is already on the shelf before ordering a dressed Engine Assembly.

CAT C11  ·  ENGINE BUILD FAMILY
Component Reference Set  34 REFERENCES
COMPONENT PART NO. ALT. NO. NOTE
CRANKSHAFT AND ROTATING GROUP11 refs
Crankshaft, engine361-88513618851Cast crankshaft, ground to standard
Crankshaft, engine361-88453618845Alternate journal configuration
Crankshaft, engine506-19825061982Current production reference
Crankshaft assembly337-08723370872Balanced assembly
Crankshaft gear, 49 teeth224-12142241214Timing gear, press fit
Connecting rod, 380 mm centres144-07251440725Matched set on request
Connecting rod, 392.5 mm centres381-65553816555Matched set on request
Connecting rod bearing, 144.45 mm OD107-73301077330Big end shell, standard
Connecting rod bearing, steel back230-25202302520Standard size
Crankshaft main bearing, standard286-58012865801Main shell, standard
Crankshaft main bearing653-86336538633Main shell, standard
PISTONS, RINGS AND LINERS3 refs
Piston ring, intermediate, 300 mm OD566-54905665490Compression ring
Piston ring, oil control, 300 mm OD566-54915665491Oil control ring
Cylinder liner bushing556-07015560701Liner and bushing set
CYLINDER HEAD AND VALVE TRAIN10 refs
Cylinder head gasket317-30643173064Multi layer steel
Valve cover gasket, cylinder head225-64512256451Rocker cover seal
Valve guide, 16 mm, grey iron122-73751227375Pressed into head
Rocker shaft313-40853134085Shaft and pedestal
Rocker shaft307-83223078322Shaft and pedestal
Camshaft, right hand421-00494210049Bank specific
Camshaft, left hand421-00714210071Bank specific
Engine camshaft223-74682237468Standard profile
Camshaft bearing249-63922496392Cam bore shell
Camshaft bearing, 98.11 mm OD116-13591161359Cam bore shell
TURBOCHARGER, FUEL AND LUBRICATION10 refs
Turbocharger actuator630-67726306772Wastegate control
Turbocharger oil supply line368-85573688557Braided feed line
Turbocharger pipe436-10834361083Charge air pipe
Hydraulic injector pump group476-87694768769Pump and injector group
Engine fuel manifold568-84335688433Rail and fittings
Fuel filter assembly399-14753991475Filter head and element
Fuel water separator460-03104600310Primary separation
Engine oil filter element610-99286109928Spin on element
Engine lubricating oil filter628-63066286306Full flow filter
Oil cooler085-51990855199Plate type cooler

These are catalogue references for the C11 build family, listed so your team can line them against the parts list already in hand. The arrangement on the engine plate remains the final word on which of them apply to a given machine, and anything not shown here is quoted from the same catalogue on request.

Questions Buyers Ask

How is fitment confirmed?
By plate data, not by model name. Send machine serial number, engine arrangement number and a nameplate photo, and the build is confirmed in writing before invoicing.

Can the engine be supplied in pieces?
Yes. Block and rotating group, head assembly, injector sets, turbocharger and liner kits are all quoted separately from the same reference list.

What is the minimum order?
One unit. Mixed orders with other parts for the same machine are welcome and can travel in one crate.

Do you support OEM or private label programmes?
Yes, including labelling, harness variations and crate stencilling for distributors who resell into neighbouring markets.

Which payment methods are accepted?
T/T, L/C, Western Union and trade assurance orders.

Send the plate, get the right C11 build
Machine model, engine serial number, arrangement number and destination port are enough for us to reply with build confirmation and pricing within one working day.
Send Your Inquiry

CAT and C11 are used as reference identifiers for fitment only. Parts are supplied by an independent aftermarket manufacturer.


CAT C11 Engine Assembly 232-2445 Excavator Diesel Engine for 336D2 340D2L 966H 972H

CAT C11 Engine Assembly 232-2445 Excavator Diesel Engine for 336D2 340D2L 966H 972H

CAT C11 Engine Assembly 232-2445 Excavator Diesel Engine for 336D2 340D2L 966H 972H

CAT C11 Engine Assembly 232-2445 Excavator Diesel Engine for 336D2 340D2L 966H 972H

CAT C11 Engine Assembly 232-2445 Excavator Diesel Engine for 336D2 340D2L 966H 972H

Contact Details
John

Phone Number : 17846849442

WhatsApp : +8617846849442