| Place of Origin: | Guangdong, China |
|---|---|
| Brand Name: | CAT |
| Certification: | ISO 9001:2015 |
| Model Number: | C12 |
| Minimum Order Quantity: | 1 Unit |
| Price: | Negotiable |
| Packaging Details: | Complete unit wrapped in VCI film, bolted to a fumigated export skid and closed inside a seaworthy plywood case with foam blocking |
| Delivery Time: | 25-35 working days after deposit |
| Payment Terms: | T/T,L/C,Western Union |
| Supply Ability: | 12 Units per Month |
| Part Name: | Engine Assembly | Engine Model: | CAT C12 |
|---|---|---|---|
| Engine Type: | Diesel Engine | Displacement: | 11.9 L |
| Cylinder Arrangement: | Inline 6 | Bore X Stroke: | 130 Mm X 150 Mm |
| Aspiration: | Turbocharged, Aftercooled | Rated Output: | 261 KW At 1800 Rpm |
| Highlight: | CAT C12 Excavator Engine Assembly,C12 Complete Diesel Motor,345B 365B Engine Replacement |
||
This CAT C12 Engine Assembly is built for machines that have to be back on the bench, not back in the yard: block, crankshaft, six piston and liner sets, loaded head, injectors, turbocharger and pumps are fitted and timed here, then the whole unit is crated as one. Buyers take it as a complete Excavator Engine Assembly when the bottom end is finished, or as a defined slice of the same list when only the top end has gone. Both routes come off one Excavator Engine Parts sheet, so the references quoted at enquiry are the references on the packing list.
| Model | CAT C12 / C-12 | Displacement | 11.9 L, inline 6 |
| Bore x stroke | 130 mm x 150 mm | Rated output | 261 kW at 1800 rpm |
| Aspiration | Turbocharged, aftercooled | Fitment | 345B / 365B class |
The C12 sits in a crowded part of the CAT range, and that is where most ordering mistakes start. A 345B ticket that reads 3176C, a 365B ticket that reads C12, and a 3196 unit that looks the same on the outside can all be quoted from the wrong page if the plate is not read first. This page is written to settle that: the arrangement on the plate decides the build, and the references below are given in both of the written forms used on parts lists, so whichever catalogue your team works from, the line matches.
Quoted from the references the buyer already holds, not from a model name.
| Complete assembly | Built to the arrangement and shipped closed: crank, rods with bearings 292-0484, piston and liner sets, loaded head, injectors 3507555, turbocharger 1251123, water pump impeller 2968388 and oil pump fitted. This is the CAT Excavator Engine Assembly that goes in over a weekend rather than a season. |
| Long block 238-2710 |
Base structure and rotating group, with the liners and pistons already in place. Chosen where the head group has just been reconditioned locally and the workshop wants to keep its own top end. |
| Top-end set 341-8888 |
Head group with valves, push rods 3418888, seals 346-5193 and injectors, plus the gaskets the joint needs. The cheapest way back to work when oil pressure is still good and only the top end is tired. |
The rest of the C12 range is quoted line by line on the same sheet: liner and piston kit references 469-5314, 1337098 and 1095319, seal group 3465193, air filter 177-7375 for the intake side, and the overhaul kit that carries the gaskets and seals for a full rebuild. Because the same CAT C12 platform sits behind all of it, a single order can cover one complete assembly plus the spares an importer wants on the shelf.
Four stages, each one closed off with a number written down against the part that owns it.
| 01 | Strip and measure. The core is stripped, the block is crack tested and the deck checked. Bores are measured before anything is ordered: if they are already at the last oversize, the customer is moved to a complete assembly rather than sold one more liner set. |
| 02 | Rotating group. Crankshaft ground and balanced, rod bearings 2920484 matched to the finished journals, end float set. Each rod is weighed and each clearance logged, because a C12 in a 365B spends its day at full load in rock. |
| 03 | Power end. Liner kits 4695314 pressed and honed, pistons and rings 133-7098 and 1095319 fitted with the gaps staggered by hand, protrusion measured on all six holes. The loaded head goes down over a fresh gasket and is torqued in three passes. |
| 04 | Dress and time. Push rods 341-8888 set, injectors 350-7555 calibrated as a matched set, camshaft timed to the arrangement, then turbocharger 125-1123, water pump and oil pump fitted. The unit is run on the stand, re-checked, and only then wrapped and crated. |
Four answers fix the scope; anything uncertain is held rather than guessed.
| Plate and prefix | Arrangement number plus machine prefix. On this family the difference between C10, C12 and 3176C can be one plate line, and the dressing follows the arrangement, not the sticker on the bonnet. |
| Injection system | Earlier and later C12 units do not share injectors. Send the number on the existing injector or the arrangement, and the right set is quoted with the assembly instead of being exchanged later. |
| Cooling and drive | Fan drive, pulley and belt routing are confirmed before assembly, along with the water pump impeller 2968388, so the unit drops onto the existing radiator group without fabrication. |
| Hours and history | Hours on the meter, last injector change, and whether the block has been bored. A C12 past 12,000 hours on its first bottom end is normally quoted complete, with the old core taken back into the rebuild line. |
Workshops fitting a CAT C12 usually want the service items on the same order rather than a second shipment: air filter 1777375 for the intake, seal group 346-5193 for the joints opened during the swap, and the gasket and seal content of the C12 overhaul kit. Liner and piston references 2382710 and 469-5314 are kept on the same sheet so a fleet can add one set as a shelf spare without opening a second enquiry.
For a plant hire fleet running several C12 machines, the standing kit is simple: one complete assembly held against the next failure, one top-end set, and a filter and seal pack. Every line comes from the same CAT C12 Excavator Engine Parts catalogue, so the numbers on the crate match the numbers in the maintenance file, with no translation step in the workshop.
Plant hire firms, earthworks and quarry contractors, independent workshops and machinery traders in Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya buy this C12 Excavator Engine Assembly and the surrounding Excavator Engine Parts on repeat schedules. The mix changes by market rather than the standard: complete units for hire fleets in Australia, Canada and Chile; long blocks and top-end sets for workshops in Indonesia, Thailand, Malaysia and Vietnam; consolidated containers of CAT excavator engine parts for traders in Nigeria, Ghana, Tanzania, Kenya and Saudi Arabia.
In Zambia, Congo, Zimbabwe and Mozambique the assembly is usually ordered with a spare injector set 350-7555 and a seal group held on site, because a second stoppage on a remote pit costs more than the spares. Buyers in Brazil, Peru and Argentina plan the rebuild around a contract start date, so the arrangement is fixed first and the build slotted into the calendar. For Canada and South Africa the packing references must line up with the maintenance file exactly, and they do.
A working reference set drawn from the CAT parts catalogue for the components inside a complete C12 build, laid out so buyers can price a full unit against a partial rebuild and workshops can check what is already on the shelf before ordering a dressed Engine Assembly.
These are catalogue references for the C12 build family, listed so your team can line them against the parts list already in hand. The arrangement on the engine plate remains the final word on which of them apply to a given machine, and anything not shown here is quoted from the same catalogue on request.
Tell us the machine prefix, the arrangement on the plate and any references already on your parts list. The reply comes back as one scope for the complete CAT C12 Engine Assembly, with additional Excavator Engine Parts priced on the same sheet. Enquiries from distributors, workshops and fleet maintenance teams are answered by the technical desk, not by an auto-reply.
Ask for the release sheet of the unit currently on the bench if the recorded figures are needed before a purchase order is raised for your excavator engine project.
![]()
![]()
![]()
![]()
![]()
![]()
![]()