| Place of Origin: | Guangdong, China |
|---|---|
| Brand Name: | CAT |
| Certification: | ISO 9001:2015 |
| Model Number: | C4.4 |
| Minimum Order Quantity: | 1 Unit |
| Price: | Negotiable |
| Packaging Details: | VCI film wrap, fumigated export skid, seaworthy plywood case with foam blocking |
| Delivery Time: | 5-10 working days for stock units |
| Payment Terms: | T/T,L/C,Western Union,Trade Assurance |
| Supply Ability: | 60 Units per Month |
| Part Name: | Engine Assembly | Engine Model: | CAT C4.4 |
|---|---|---|---|
| Displacement: | 4.4 L | Bore X Stroke: | 105 Mm X 127 Mm |
| Cylinder Arrangement: | Inline 4, Four Stroke | Aspiration: | Turbocharged |
| Fuel System: | Electronic Unit Injection | Rated Output: | 74 - 110 KW (99 - 148 Hp) |
| Condition: | New Build, Dyno Tested | Emission: | Tier 3 / Stage IIIA Compatible |
| Highlight: | C4.4 Complete Engine Assembly,320GC Excavator Diesel Motor,Dyno Tested Drop In Power Unit |
||
Assembled, timed, dressed and dyno run as one build, then crated as a single Excavator Engine Assembly that goes in where the old unit came out.
This is not a short block with accessories bolted on in a hurry. The CAT Engine in this listing is built as one assembly: a new cylinder block with a crankshaft ground to standard, four matched piston and liner sets, a loaded and pressure tested head, a calibrated injector set, and the turbocharger, oil pump, water pump, thermostat housing, manifolds, filter head and engine harness already in place. It leaves our floor as a CAT C4.4 unit that a fitter can mount, prime and start.
The buyer for this Excavator Engine Assembly is usually facing one of two situations. Either a 320GC is standing in a pit with a scored crank or a soft cylinder, and every extra day of downtime costs more than the part; or the workshop wants a known good unit on the shelf so the next rebuild does not stop the schedule. Both are handled from the same build sheet, and both can also be quoted as separate Excavator Engine Parts when only part of the engine has gone.
| DECISION POINT | COMPLETE ENGINE ASSEMBLY | IN FRAME REBUILD |
|---|---|---|
| Machine downtime | Hours on site, not weeks in the shop | Machine waits for machining, parts and bench time |
| Result certainty | Unit is run on the dyno before it ships | Quality depends on the shop doing the work |
| Fits in a tight bay | Lift out, mount dressed unit, prime, start | Head, sump and turbo work inside a cramped frame |
| Spare parts exposure | One part number, one shipment | Multiple suppliers, multiple arrival dates |
| Best fit for | Production machines and rental fleets | Owners with bench capacity and time |
A C4.4 is identified on the plate by its arrangement number, and only under that arrangement do the individual component numbers resolve. The same 4.4 litre engine went into the field in many arrangements across emission steps and applications, so a component number that is right for one plate is wrong for the next one. We therefore do not publish a single blanket part number for this build, and we do not ask buyers to match our listing against a catalogue page: we ask for your plate.
Send the engine arrangement number and serial number from the plate, and we return the component list that belongs to that arrangement, written out in both of the styles used on parts paperwork so it lines up with whichever catalogue your team works from, with and without the separator. Block, head, crankshaft, rods, pistons, liners, turbocharger, injector set, pumps, gasket set and harness are all quoted line by line, normally inside one working day.
If you already hold a component number and want it checked before you commit, send it with the serial number. We confirm whether it belongs to your arrangement, and if it does not, we tell you the correct reference for that plate instead of substituting a lookalike that fits the hole but not the calibration.
This build is specified for the CAT 320GC hydraulic excavator, a 20 tonne class machine where the engine bay is tight and rear block access through the frame opening is limited, which is exactly why a dressed assembly beats an in frame rebuild on this model. The 320GC badge covers more than one production configuration, so coverage is confirmed per serial number rather than assumed from the decal. Machines that run the same C4.4 configuration are quoted on request from the same reference sheet.
Units from this Engine Assembly line ship regularly to Australia, Canada, Chile, Zambia, Congo, Nigeria, Ghana, Tanzania, Indonesia, Thailand, Malaysia, Zimbabwe, Brazil, South Africa, Saudi Arabia, Mozambique, Peru, Argentina, Vietnam and Kenya. Most of those shipments are distributor and workshop orders that combine an engine with hydraulic, undercarriage or electrical parts in one consolidated load, and the same crate can carry filters, gasket sets and a spare injector if the buyer wants a service package to go with the unit.
Packing is VCI wrap on machined faces, bolted to a fumigated export skid and closed in a seaworthy plywood case with foam blocking. Documents cover packing list, commercial invoice and the certificate of origin required at destination.
This set sits alongside section 05 rather than replacing it. The plate still decides the build; what follows is the catalogue side of the same conversation, so your team can see which references belong to the C4.4 family, price a full unit against a partial overhaul, and tell us what is already on the shelf before a dressed Engine Assembly is ordered.
These are catalogue references for the C4.4 build family, listed so your team can line them against the parts list already in hand. The arrangement on the engine plate remains the final word on which of them apply to a given machine, and anything not shown here is quoted from the same catalogue on request.
How do I confirm fitment for my 320GC?
Send the machine serial number, the arrangement number from the engine plate and a photo of the plate. We reply with the matched component list and confirm the build in writing before invoicing.
Can I buy only part of the engine?
Yes. Long block, short block, loaded head, injector set, turbocharger and liner kits are quoted individually against your arrangement.
What is the minimum order?
One unit, and mixed parts for the same machine can travel in the same crate.
Do you handle OEM and private label?
Yes, including labelling, harness variants and crate stencilling for distributors.
Which payment terms apply?
T/T, L/C, Western Union and trade assurance orders.
CAT, C4.4 and 320GC are used as reference identifiers for fitment only. Parts are supplied by an independent aftermarket manufacturer.
![]()
![]()
![]()
![]()
![]()
![]()
![]()