products

CAT C9 Engine Assembly 8.8L Six Cylinder Turbo Diesel Excavator Engine Replacement Unit

Basic Information
Place of Origin: Guangdong, China
Brand Name: CAT
Certification: ISO 9001:2015
Model Number: C9
Minimum Order Quantity: 1 Piece
Price: Negotiable
Packaging Details: VCI film with desiccant, fumigation-free plywood skid, steel strapping, labelled bags for loose service parts
Delivery Time: 3-5 working days for stock, 15-25 days for production
Payment Terms: T/T,L/C,Western Union
Supply Ability: 30 Pieces per Month
Get Best Price
Chat Now
Detail Information
Engine Model: CAT C9 Part Name: Engine Assembly
Displacement: 8.8 L Rated Power: 200 KW At 1900 Rpm
Peak Torque: 1275 N.m At 1400 Rpm Emission Level: Tier 3 / Stage IIIA Equivalent
Fitment: CAT 330D 330D2 336D 336D2 Cylinder Count: 6 Inline
Bore X Stroke: 112 Mm X 149 Mm Aspiration: Turbocharged And Aftercooled
Flywheel Housing: SAE No. 1
Highlight:

C9 Engine Replacement Unit

,

8.8L Six Cylinder Diesel Assembly

,

Excavator Engine Swap Unit 336D


Product Description

CAT C9 Engine Assembly — 8.8 L Six Cylinder Turbo Diesel Replacement Unit

This C9 Engine Assembly is built for CAT 330D, 330D2, 336D and 336D2 excavators. Supplied as a complete, ready to connect CAT Engine rather than a shell block, so the machine goes back to work in days instead of weeks.

8.8 LDisplacement
6Cylinders, Inline
200 kWRated Output
1275 N.mPeak Torque
SAE No.1Flywheel Housing

When An Engine Assembly Is The Right Answer

Excavator engines rarely fail without warning, and a C9 CAT Engine that has been nursed through several repair cycles usually costs more than one decisive replacement. Oil pressure fades, blow-by increases, the machine starts needing either, and the workshop starts quoting repair after repair. At that point the choice is between another partial repair and a complete power unit that removes the uncertainty in one move.

This CAT Engine Assembly is aimed at the second choice. The block, head, crank, pistons, injection system, turbocharger and mounting are supplied as one matched unit that has already been run in on a test bench, which means the first start happens on your machine instead of on a rebuild bench.

Symptoms This CAT Engine Replacement Addresses

Symptom What it usually points to What the new assembly provides
Knocking under load Worn rod or main bearings, damaged crank journal Ground crank with new bearing set, clearances measured and logged per journal
Oil pressure drops when hot Worn oil pump, excessive bearing clearance New oil pump, pickup tube and matched bearing clearances
Coolant in oil or white exhaust Cracked head, failed head gasket, porous liner seat Pressure tested head, new gasket set, liners checked for protrusion
Power loss with black smoke Worn turbocharger, unbalanced injectors, low boost Turbocharger fitted and boost checked, injector set flow matched
Hard starting or rough idle Injection pump wear, controller faults, air in fuel Injection pump installed, controller bench tested before dispatch
Blow-by and rising oil use Worn liners, stuck or worn rings Honest liners, new piston and ring set, bores measured

If the machine shows two or more of these symptoms, a complete C9 Excavator Engine Assembly is usually cheaper than a chain of partial repairs, especially when the excavator is earning money every working day.

Machine Compatibility To Confirm For Each Engine Assembly

Machine Typical duty What we confirm before dispatch
CAT 330D / 330D L General excavation, trenching, loading Serial prefix, rating and arrangement number
CAT 330D2 / 330D2 L Quarry work, road construction Emission build and injection configuration
CAT 336D / 336D L Heavy earthmoving, mass excavation Flywheel housing and front drive layout
CAT 336D2 / 336D2 L / 336D2 GC Mining support, bulk haul loading Oil pan shape, turbo orientation, harness points

Models are listed as a guide only for this Engine Assembly. The C9 platform was built in several ratings and emission builds, so the arrangement is confirmed from the machine serial number rather than assumed from the model badge.

What Comes With This Excavator Engine Assembly

  • Cylinder block of the C9 CAT Engine with liners fitted, honed and protrusion checked
  • Assembled cylinder head with valve train set to specification
  • Crankshaft, connecting rods, pistons and rings installed
  • Front cover, timing gears, rear seal and oil pan fitted
  • Oil pump, oil cooler, water pump and thermostat housing mounted
  • Fuel injection pump and injector set installed
  • Turbocharger and exhaust manifold mounted on the CAT Engine
  • Flywheel housing fitted, ready for your existing flywheel
  • Controller and harness connection points labelled for reconnection
  • Lifting eyes fitted for balanced crane handling

Specification Sheet

Item Value
Engine model CAT C9
Part name Engine Assembly
Cylinder count 6, inline, four stroke
Displacement 8.8 L
Bore x stroke 112 mm x 149 mm
Aspiration Turbocharged with air to air aftercooling
Rated power 200 kW at 1900 rpm
Peak torque 1275 N.m at 1400 rpm
Compression ratio 16.1 : 1
Firing order 1-5-3-6-2-4
Fuel system Electronic unit injection with controller
Cooling Water cooled, gear driven pump
Emission level Tier 3 / Stage IIIA equivalent
Flywheel housing SAE No. 1
Weight as shipped Approximately 900 kg
Condition New aftermarket replacement, not genuine

Service Part Numbers For This C9 Engine Assembly

Numbers are listed in both the dashed and the plain format because catalogues and search fields handle them differently. Both forms point to the same service item, and all of them belong to the C9 family used on this unit.

  • 1632478
  • 163-2478
  • 2133190
  • 213-3190
  • 3465193
  • 346-5193
  • 5754995
  • 575-4995
  • 1922169
  • 192-2169
  • 2457339
  • 245-7339
  • 2223909
  • 222-3909
  • 5577633
  • 557-7633
  • 4787932
  • 478-7932
  • 4787933
  • 478-7933

Every number was checked against the Excavator Engine Assembly build list, and the set covers the valve stem seal, connecting rod bearing set, rear crankshaft seal, valve lifters, 8K fan belt, seal groups, fuel injector and ECU controller that are normally renewed together with an engine change. Ordering them with the engine keeps the first service interval covered. The arrangement number for the specific machine is confirmed from its serial number before shipment.

Commissioning Checklist For The C9 Engine Assembly

  1. Confirm machine model and serial number before the order is released, and approve the fitment sheet we return.
  2. Photograph the old engine bay, mounts, hoses and harness routing before removal, so nothing is guessed during refitting.
  3. Check the new Excavator Engine Assembly against the fitment sheet on arrival: housing, pan, front drive, turbo orientation, harness points.
  4. Prime oil and fuel before the first crank of the C9 Engine Assembly, then run at idle and listen for abnormal noise.
  5. Run under load and compare boost, coolant temperature and blow-by against the test record supplied with the crate.
  6. Sign and return the test sheet so any question raised during commissioning is handled by the team that built the engine.

What We Need To Confirm This C9 Engine

Machine identity

Model and serial number, plus a photo of the machine plate if available.

Engine condition

A short note or video of the symptom, so we confirm the right solution instead of a guess.

Quantity and timing

Units needed and when the machine must be back at work, so stock or production is planned accordingly.

Export Experience

Every Excavator Engine Assembly from this line ships to fleets, rental yards, workshops and parts distributors working in mining, quarrying, road construction and port handling. Buyers in these markets usually work far from a dealer network, so a confirmed fitment sheet and clear part numbers matter more than brochure language.

Typical destinations for the C9 Engine Assembly include Australia, Canada, Chile, Peru, Argentina, Brazil, South Africa, Zambia, Congo, Zimbabwe, Mozambique, Tanzania, Kenya, Nigeria, Ghana, Saudi Arabia, Indonesia, Thailand, Malaysia and Vietnam. Documents are issued in English and Spanish, and crate markings can follow your own numbering so the unit goes straight into stock.

Packing The C9 Engine Assembly

  • VCI anti-rust film with desiccant sachets over the complete C9 engine
  • Bolted to a fumigation-free plywood skid and steel strapped
  • All openings capped against dust and moisture
  • Loose service parts bagged, labelled and packed inside the crate with the Excavator Engine Assembly
  • Neutral packing or buyer branded labels on request

Send Your Serial Number, Get A Confirmed Unit

Machine model, serial number and quantity is all we need to start. You will receive the confirmed C9 Engine Assembly configuration, the matching service part numbers and a quotation for your market.


CAT C9 Engine Assembly 8.8L Six Cylinder Turbo Diesel Excavator Engine Replacement Unit

CAT C9 Engine Assembly 8.8L Six Cylinder Turbo Diesel Excavator Engine Replacement Unit

CAT C9 Engine Assembly 8.8L Six Cylinder Turbo Diesel Excavator Engine Replacement Unit

CAT C9 Engine Assembly 8.8L Six Cylinder Turbo Diesel Excavator Engine Replacement Unit

CAT C9 Engine Assembly 8.8L Six Cylinder Turbo Diesel Excavator Engine Replacement Unit

CAT C9 Engine Assembly 8.8L Six Cylinder Turbo Diesel Excavator Engine Replacement Unit

Contact Details
John

Phone Number : 17846849442

WhatsApp : +8617846849442